High quality adhesive specifically for Ebb&Flow bathtubs with a volume of 300 ml. It is important not to overuse the adhesive as this may damage the tubs.
Terms and Conditions:
- Bonding should be done at temperatures between 5-25 °C.
- The containers must be dry and stored dry during the curing process.
Support for table container:
- The trays are designed for a maximum evenly distributed load of 70 kg/m2.
- Certain criteria must be met, such as the spacing of the support tables of up to 500 mm and the positioning of the support less than 70 mm from the edge of the adhesive.
- The support should also be less than 200 mm from the edge of the bench's container, taking care not to allow the tub to rest on the support bar.
- NOTE: The support must be placed under the part of the tub that contains the adhesive edge (see drawing).