The image is for illustrative purposes only. We deliver the product in the EU version, including the adapter.
The TrolMaster DSH-2 Humidity/Device Control Modules allow users to easily connect and control conventional humidification or dehumidification devices with the Hydro-X unit. This module allows control of any humidification or dehumidification device using worldwide voltage standards (100-240 VAC, 50/60 Hz) up to 10 amps. * Use dehumidifiers with a power draw of less than 7 amps to avoid overloading.
Status LED:
* Fast green flashing: If the LED flashes quickly, it means that the module has not been addressed to the control unit OR that the module does not have a good connection to the control unit.
* Pressing the small button on the module addresses/connects the module during initial installation.
* Slow green flashing: If you see a slow flashing green LED, it means the module is addressed and connected to the control unit and the module is currently powered off.
* Solid green: If the LED is solid (not flashing), it means the modules are addressed, connected, and currently powered on.
* Flashing red: If the LED changes to flashing red, it indicates that the module is overloaded. To reset the overload, disconnect the module from the power supply.
* By pressing and holding the button on the DSH-2 module, users can manually override and turn the module on and off.
The package contains:
1 x Device Station
1 x 16ft RJ12 cable
1 x 4ft RJ12 cable
1 x RJ12 T-splitter